Search Results (26K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I have added an additional physical disk my PowerEdge 650 server.After the disk was ready i logged into the IDRAC and added it to the existing raid and started the reconstruction which took about 24 hours to complete fully.The drive is now showing to be part of the raid 5 and the size of the raid on
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello Dell storage experts:I am going to update disk firmware in PowerVault ME5024 storage. Guidelines tells to stop I/O before the firmware update. but I still could not find the way of doing so. please guide to me stop I/O of system.
Question
•
PowerVault
Community Accepted Solution
Hi,I am trying to LAG two of the 10 gig ports between an N2024 running OS6 and a S3124 running OS9. I can't seem talk between the two stacks. Maybe I'm getting tripped up by a naming convention change. I have include the port configs for the ports in question. If someone could help me out I'd really
Question
•
Networking General
Community Accepted Solution
Hello , I have to disable SSH on all of my Dell IDRACs because of Security Reasons . I also want to configure SNMP with our Community String . I created an Template to rollout to al IDRACS so that SNMP become enable and also shows our Community String . That works fine and i can choo
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi, I have a server with a failed main board, I bought a replacement (ebay) which doesn't have an iDRAC enterprise licence. How can I transfer the licence from the failed board to the new (used) board? Thanks in advance.
Question
•
Systems Management General
Community Accepted Solution
Hello together, I am asking for a friend...After we have discovered a new server with OME 4.1.0, a new user (OME_29fbxxxxx) with the Administrator user role appears on the iDRAC board under the local users. So far we have no idea how this is generated and why. We have only been using this latest OME
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi i have a powervault MD3220 which is currently running on 1 raid controller in slot 1. In slot 0 currently there is no hardware. So i have bought a new controller which i want to put in with a different fireware too. Can i put it with out powering off the whole unit?
Question
•
PowerVault
Community Accepted Solution
Hello, I understand that when deploying the appliance that 2*415GB hard drives are required. Do both hard drives need to reside on the same datastore or can they reside on 2 different datastores? Thanks in advance,
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I have questions about using the PowerFlex API and documentation notation. 1. Do the query parameters in the POST method actually mean the body of the request? (Link)Looking at the example, it looks like what is labeled as a query parameter actually needs to be passed as JSON in the body to work.
Question
•
PowerFlex
Community Accepted Solution
Hi . Same problem on my server. ı m confused then ı had angry. Could you help me this problem :) When i firmware update on F10 Lifecyle . That is seen this error SWC0066. My internet is normal. Modem rule is normal. ı have no Firewall and switch . I did NVRAM clear . check other compenent bu
Question
•
Rack Servers
Community Accepted Solution
Our SCGs are sending a lot of ssh requests against our defined devices. The requests are stopped in our firewall. Why? And how to change it?
Question
•
Secure Connect Gateway
Community Accepted Solution
Hi, I'm using SCG-PM-5.22.00.18-podman. The SCG was running fine with a CA signed certificate. Now the certificate has been renewed. I uploaded it via the web gui, the gui accepted certificate and key. But after after a restart of the application I'm not able to connect to the web gui on port 5700
Question
•
Secure Connect Gateway
Community Accepted Solution
Hi all, I have a Dell R730 with 2 x Xeon E5-2673v4 (20 core), 256 GB RAM, 16 x 2.5" Crucial 2TB SSD configured as a RAID-10 with a H730 Perc controller. On this device are 20 VMs, each configured with 8GB of RAM and 4 vCPU. A couple of the users logging in via RDP are saying that the response time
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi~ Is there any plan to support Xen server with perc 12?
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Can I use the SFP+ ports 25 and 26 on a S3124 switch to connect an ME5 iSCSI storage using DAC cables?
Question
•
Networking General
Community Accepted Solution
Hello, I am setting up a ME5024 with 10x 4TB disks for VM storage and was wondering about pool setup. If I use the auto setup it creates one RAID 6 30TB pool if I create a manual pool of 2x RAID 6 and one RAID 1 using both controllers I would lose about 11TB of space. How much of a performance hit
Question
•
PowerVault
Community Accepted Solution
Hi, I am trying to upgrade firmware on my 5N7Y5 card. I am using Network_Firmware_1R0W0_LN_22.5.7_A00 package on Linux. Unfortunately, the update fails at 5% with: ./nvmupdate64e -u -l -f Intel(R) Ethernet NVM Update Tool NVMUpdate version 1.39.68.2 Copyright(C) 2013 - 2023 Intel Corporation. Co
Question
•
Networking General
Community Accepted Solution
We successfully migrated from a working OMIVV to OMEVV. I am trying to register the OMEVV Plugin. Version: 1.3.0.1581. I get the error attached. Running vSphere Client version 7.0.3.01700 Troubleshooting the plugin, "/core/console/console.html#/omc/troubleshoot", I can ping our vcenter server, whic
Question
•
OpenManage Integration for VMware vCenter
Community Accepted Solution
Hi all, Does someone know the part number of this piece? Poweredge R340 right ear Thanks in advance,
Question
•
PowerEdge Hardware General
Community Accepted Solution
Please, can somebody tell me how can I delete a user quota from Unisphere or UEMCLI, SVC, API, Powershell? There is no DELETE button or options in user quota page in UNISPHERE UNITY GUI or from UEMCLI there is no a REMOVE or DELETE option. I put the hard quota limit and soft limit to ZERO, all go
Question
•
Unity